- Lámina corrugada
- Bobina de acero
- Tubería de acero de...
- Tubo sin soldadura
- ASTM A106/A106M, ASTM A53/A53M
- Api Spce 5L para el propósito del transporte
- Tubos de acero Circulal sin costura Din 1629
- Din17175 para las tuberías de la industria de la caldera
- Máquina de carbono sin costura ASTM A 519
- A 192 / A 192M-02 Tubos de caldera para alta presión
- A 179 / A179M para intercambiador de calor y tubos de condensador
- Tubos de acero soldados
- Pipas de acero inconsútiles
- Otros tubos de acero
- Tubo de aleación
- Tubería de acero de...
- Tubos de plástico
- Bobinas de acero y h...
- Tubo Rectangular y S...
- Conecte la manga de ...
DIN2391-1 / EN 10305-1 BK NBK GBK perfecta precisión de acero del tubo
Descripción del producto
Descripción detallada
acero al carbono tubos para usos estructurales de la máquina. Estándar: DIN2391-1: tubo de acero inconsútil de precisión. EN 10305-1: acero tubos para aplicaciones de precisión - condiciones técnicas de entrega – parte 1: tubos sin soldadura de dibujado frío. Tamaño (mm): dimensiones exteriores: 10 mm ~ 100,0 mm espesor: 2mm ~ 25 mm longitud: máximo 12000mm aplicación: Descripción detallada
acero al carbono tubos para usos estructurales de la máquina. Estándar: DIN2391-1: tubo de acero inconsútil de precisión. EN 10305-1: acero tubos para aplicaciones de precisión - condiciones técnicas de entrega – parte 1: tubos sin soldadura de dibujado frío. Tamaño (mm): dimensiones exteriores: 4.0m m ~ 100,0 mm espesor: 0,5 mm ~ 8 mm longitud: máximo 6000mm aplicación: cilindro hidráulico, maquinaria de construcción, componentes neumáticos, automóviles o piezas de la motocicleta, tubos de bomba de concreto, motor shell, base de tubo de papel de aluminio y así sucesivamente. Grado de acero: DIN2391 1(ST35, ST45, ST52), EN10305-1(E215, E235, E355). Embalaje: Desnudo/paquetes/cajas/cajón protección en ambos lados de los tubos o según los requisitos de clientes. Pintura: requerimiento de embalaje: protección desnudo/paquetes/cajas/cajón en ambos lados de los tubos o según los requisitos de clientes. Pintura: requerimiento
|
Name |
Din 2391 prcision carbon steel tube made in china |
|
Standard |
Din 2391 |
|
Material |
St35,St45,St52 |
|
Supply Condition |
Cold drawn seamless steel tube, stress relieved and honed or skived roller burnished |
|
Appearance |
Tube shall have a smooth internal and external surface consistent with cold working process, tube inner surface should be free from rust, scratches and other surface irregularities. |
|
Tolerance on Outer Dia. |
≤ Dia 40 +/-0.2 mm |
|
Surface Roughness |
Ra = 0.4~0.8 Micron |
|
Application |
Cold drawn or cold rolled precision seamless steel tubes for hydraulic pressure and pneumatic services.For Auto use,machinery use,oil cylinder tube,motorcycle shock reducer use,auto shock reducer inner cylinder,etc.Seamless steel pipes for low and medium pressure boiler, high pressure boiler, ship-building,Liquid service, petroleum cracking, chemical fertilizer equipment,Drawing-oil-equipment and structure purposes. |
| material | Chemical Composition(%) | ||||
| C max. | Si max. | Mn | P max. | S max. | |
| St 35 | 0.17 | 0.35 | ³0.40 | 0.025 | 0.025 |
| St 45 | 0.21 | 0.35 | ³0.40 | 0.025 | 0.025 |
| St 52 | 0.22 | 0.55 | £1.60 | 0.025 | 0.025 |
| material | Cold finished (hard)BK(+C) | Cold finished (Soft)BKW | Cold finished and stress-relieved BKS(+SR) | ||||
| (+LC) | |||||||
| Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Yield Point(Mpa) | Elongation(δ5/%) | |
| St 35 | 480 | 6 | 420 | 10 | 420 | 315 | 14 |
| St 45 | 580 | 5 | 520 | 8 | 520 | 375 | 12 |
| St 52 | 640 | 4 | 580 | ||||
| material | Annealed GBK(+A) | Normalized NBK(+N) | |||
| Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Yield Point(Mpa) | Elongation(δ5/%) | |
| St 35 | 315 | 25 | 340-470 | 235 | 25 |
| St 45 | 390 | 21 | 440-570 | 255 | 21 |
| St 52 | 490 | 22 | |||
| material | Annealed GBK(+A) | Normalized NBK(+N) | |||
| Tensile Strength(σb/MPa) | Elongation(δ5/%) | Tensile Strength(σb/MPa) | Yield Point(Mpa) | Elongation(δ5/%) | |
| St 35 | 315 | 25 | 340-470 | 235 | 25 |
| St 45 | 390 | 21 | 440-570 | 255 | 21 |
| St 52 | 490 | 22 | |||
|
Designation |
Symbol |
Description |
|
Cold finished (hard) |
BK(+C) |
Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation |
|
Cold finished (Soft) |
BKW |
The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding) |
|
Cold finished and stress-relieved |
BKS(+SR) |
Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. |
|
Annealed |
GBK(+A) |
The last Cold forming process is followed by annealing in a controlled atmosphere. |
|
Normalized |
NBK(+N) |
The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
| SIZE | SIZE |
| OD*thickness | OD*thickness |
| 25*2-3-4-5-6 | 54*5-6-8-10-12 |
| 27*2-3-4-5-6 | 55*5-6-8-10-12 |
| 28*2-3-4-5-6 | 57*5-6-8-10-12 |
| 30*3-4-5-6-8-10 | 60*5-6-8-10-12 |
| 32*3-4-5-6-8-10 | 63.5*5-6-8-10-12-14 |
| 34*3-4-5-6-8-10 | 65*5-6-8-10-12-14 |
| 36*3-4-5-6-8-10 | 68*5-6-8-10-12-14 |
| 37*3-4-5-6-8-10 | 70*5-6-8-10-12-14 |
| 38*3-4-5-6-8-10 | 73*5-6-8-10-12-14 |
| 40*3-4-5-6-8-10-12 | 76*5-6-8-10-12-14-16 |
| 42*3-4-5-6-8-10-12 | 78*5-6-8-10-12-14-16 |
| 45*3-4-5-6-8-10-12 | 80*5-6-8-10-12-14-16 |
| 46*3-4-5-6-8-10-12 | 83*5-6-8-10-12-14-16 |
| 48*3-4-5-6-8-10-12 | 89*8-10-12-14-16 |
| 50*3-4-5-6-8-10-12 | 95*8-10-12-14-16 |
| 51*5-6-8-10-12 | 98*8-10-12-14-16 |
| 53*5-6-8-10-12 | 100*8-10-12-14-16 |
Grupos de Producto : Tubería de acero de precisión
Premium Related Products
